• ← Back to Support

    EZCODE / SUPPORT

    8900A

    USB desktop barcode scanner
    Setup guide

    For the 8900A shown here.
    Check your model label before scanning a setting.

    EZCODE 8900A square-head USB scanner on adjustable stand
    Scan only the setting you need. Use your scanner, not your phone camera.
    Save to your phone: open a group image, then touch and hold to save it. Enlarge before scanning, or print the saved image.

    Basic settings

    Scan only the action you need.

    Factory reset

    Factory reset setting code

    Erases custom settings. Default: USB, Auto Trigger, Enter.

    Version information

    Version information setting code

    Read the scanner version for technical support.

    Open / save basic settings image ↗

    USB connection

    Choose ONE interface for your application.

    USB keyboard

    USB keyboard setting code

    Standard keyboard input over the USB cable.

    USB Virtual COM

    USB Virtual COM setting code

    For compatible software. Ask your supplier for the required driver.

    Open / save usb connection image ↗

    Barcode types

    Each setting controls one barcode family.

    2D only: scan Enable 2D, then Disable 1D. This enables the 2D family, not QR codes exclusively. To restore both families, scan Enable 1D and Enable 2D. Enabling every type may reduce decoding speed.

    Enable 1D

    Enable 1D setting code

    Allow reading all supported 1D barcode types.

    Disable 1D

    Disable 1D setting code

    Stop reading 1D barcodes.

    Enable 2D

    Enable 2D setting code

    Allow reading all supported 2D barcode types.

    Disable 2D

    Disable 2D setting code

    Stop reading 2D barcodes.

    Open / save barcode types image ↗

    Reverse-image barcodes

    Choose ONE option for inverted barcode images.

    Allow

    Allow setting code

    Enable reading reverse-image barcodes.

    Forbid

    Forbid setting code

    Disable reading reverse-image barcodes.

    Open / save reverse-image barcodes image ↗

    Keyboard language

    Match the scanner language to the host keyboard layout.

    American English

    American English setting code

    Default keyboard language.

    Italian

    Italian setting code

    Italian keyboard layout.

    German

    German setting code

    German keyboard layout.

    French

    French setting code

    French keyboard layout.

    Russian

    Russian setting code

    Russian keyboard layout.

    Portuguese (Brazil)

    Portuguese (Brazil) setting code

    Brazilian Portuguese keyboard layout.

    Open / save keyboard language image ↗

    Keyboard output

    Choose ONE output method.

    Standard keyboard

    Standard keyboard setting code

    Default keyboard output method.

    Virtual keyboard

    Virtual keyboard setting code

    Keep the numeric keypad enabled (Num Lock on).

    Open / save keyboard output image ↗

    End-of-scan character

    Choose ONE ending character for your application.

    No suffix

    No suffix setting code

    Do not add an ending character.

    CR / Enter

    CR / Enter setting code

    Add a carriage return.

    CR + LF

    CR + LF setting code

    Add carriage return and line feed.

    Tab

    Tab setting code

    Add a tab after each scan.

    Open / save end-of-scan character image ↗

    Quick help

    No text appears? Connect the USB cable, choose USB keyboard, then test in a text field. Virtual COM requires compatible software and a driver.

    Wrong characters? Match the keyboard language to your computer. For Virtual keyboard output, keep Num Lock on.

    Automatic scanning: Auto Trigger is the factory default. The supplied manual has no separate scan-mode setting code. Factory reset also clears your other custom settings.

    ← Back to Support
Cookie Use
We use cookies to ensure a smooth browsing experience. By continuing we assume you accept the use of cookies.
Learn More