- ← Back to Support
EZCODE / SUPPORT
JWH
Wireless 1D scanner
Setup guideMatch the product photo and model label before using these settings.
Scan only the setting you need. Use your scanner, not your phone camera.
Save to your phone: open a group image, then touch and hold to save it. Enlarge the image before scanning. If your scanner cannot read a screen, print the saved image.
JWH is a 1D scanner. These settings do not enable QR-code reading.Basic settings
Scan only the setting you need.
Open / save basic settings image ↗Factory reset
Erases custom settings. Re-pair the receiver if needed.
Manual scan
Press the trigger to scan. Choose one scan mode.
Continuous scan
Scan continuously. Choose one scan mode.
Check battery
Display the remaining battery level.
Check version
Read the scanner version for technical support.
Wireless connection
Receiver pairing and optional Bluetooth modes.
Bluetooth options apply only to Bluetooth-equipped variants. Choose one Bluetooth mode, then find Barcode Scanner in your device's Bluetooth settings. HID, SPP and BLE are alternatives, not a three-step sequence.
Open / save wireless connection image ↗Re-pair receiver
Use for a replacement receiver or after a reset.
Bluetooth HID
Bluetooth models only. Standard keyboard input.
Bluetooth SPP
Bluetooth models only. For compatible POS software.
Bluetooth BLE
Bluetooth models only. For compatible applications.
Sound settings
Choose one option. Sound is on by default.
Open / save sound settings image ↗Sound on
Enable the scanner beep.
Sound off
Mute the scanner beep.
End-of-scan character
Choose one terminator for your application.
Open / save end-of-scan character image ↗CR
Add a carriage return.
CR + LF
Add a carriage return and line feed.
Tab
Add a tab after each scan.
No terminator
Send the barcode without an ending character.
Inverted barcodes
Choose one option for light bars on a dark background.
Open / save inverted barcodes image ↗Allow inverted codes
Enable inverted-color barcode recognition.
Block inverted codes
Disable inverted-color barcode recognition.
Data & inventory
Choose a transfer mode. Upload before clearing data.
Open / save data & inventory image ↗Normal mode
Send each scan to the connected host in real time.
Inventory mode
Store scanned data in the scanner.
Data-loss prevention
Store data automatically if transmission fails.
Upload stored data
Transfer saved scans to the host.
Count stored scans
Display the total amount of stored data.
Clear stored data
Deletes inventory data. Upload and verify first.
Sleep & power
For sleep: scan Step 1, then choose ONE time.
Open / save sleep & power image ↗Step 1 - Sleep setup
Scan this before selecting a sleep time.
Step 2 - 1 minute
Scan after Step 1.
Step 2 - 5 minutes
Scan after Step 1.
Step 2 - 20 minutes
Scan after Step 1.
Step 2 - Never sleep
Scan after Step 1. Disables automatic sleep.
Power off now
Separate action. Switches the scanner off immediately.
Letter case
Choose one option for alphabetic barcode data.
Open / save letter case image ↗Keep original case
Turn case conversion off.
UPPERCASE
Convert all letters to uppercase.
lowercase
Convert all letters to lowercase.
Swap letter case
Exchange uppercase and lowercase letters.
Transfer speed
Choose one output speed for your host.
Open / save transfer speed image ↗Fast
Fast output speed.
Medium
Medium output speed.
Slow
Slow output speed.
Keyboard language - 1
Match the scanner to the host keyboard layout.
Open / save keyboard language - 1 image ↗US English
American keyboard layout.
Italian
Italian keyboard layout.
French
French keyboard layout.
German
German keyboard layout.
Keyboard language - 2
Match the scanner to the host keyboard layout.
Open / save keyboard language - 2 image ↗Turkish F
Turkish F keyboard layout.
Turkish Q
Turkish Q keyboard layout.
Hungarian
Hungarian keyboard layout.
Japanese
Japanese keyboard layout.
Russian
Russian keyboard layout.
