• ← Back to Support
    EZCODE · SETUP GUIDE

    TBH-SU

    Your scanner. Your settings.
    Find the code you need below.

    EZCODE TBH-SU scanner with stand
    TBH-SU · Check the model label on your scanner.

    Find your setting below. Scan with your EZCODE scanner, not your phone camera.

    Scan only the code you need. These settings are for your TBH-SU scanner.
    Save to your phone: open a group image below, then touch and hold it and choose Save Image or Download image.
    01 / SETUP

    Basic settings

    TBH-SU

    Choose the setting you need. Do not scan every code.

    Factory reset

    Factory reset setting code

    Reset only when needed.

    Custom settings may be lost.

    Manual mode

    Manual mode setting code

    Press the trigger to scan.

    Choose ONE scanning mode.

    Auto sensing

    Auto sensing setting code

    Scan when an item is detected.

    Choose ONE scanning mode.

    Continuous scan

    Continuous scan setting code

    Scan continuously.

    Choose ONE scanning mode.

    Open / save basic settings image ↗
    02 / SETUP

    Barcode types

    TBH-SU

    Choose ONE option. The other code type will be disabled.

    1D barcodes only

    1D barcodes only setting code

    Read linear barcodes.

    QR reading will be disabled.

    QR codes only

    QR codes only setting code

    Read QR codes.

    1D reading will be disabled.

    Open / save barcode types image ↗
    03 / SETUP

    Bluetooth connection

    TBH-SU

    Standard pairing: scan Step 1, then Step 2.

    Step 1 · Bluetooth HID

    Step 1 · Bluetooth HID setting code

    Select standard Bluetooth mode.

    Then scan Step 2.

    Step 2 · Pairing

    Step 2 · Pairing setting code

    Open Bluetooth on your device.

    Connect to Barcode Scanner HID.

    SPP · POS alternative

    SPP · POS alternative setting code

    Only if your POS requires SPP.

    This is NOT Step 3.

    Open / save bluetooth connection image ↗
    04 / SETUP

    2.4G wireless

    TBH-SU

    Use the supplied USB receiver. Re-pair only when needed.

    Step 1 · 2.4G mode

    Step 1 · 2.4G mode setting code

    Select the receiver connection.

    Supplied receiver is factory-paired.

    Step 2 · Re-pair

    Step 2 · Re-pair setting code

    For receiver re-pairing only.

    Scan after selecting 2.4G mode.

    Open / save 2.4g wireless image ↗
    05 / ADVANCED

    Sound settings

    TBH-SU

    Advanced settings — choose ONE sound option.

    Low volume

    Low volume setting code

    Set the scanner buzzer.

    Choose ONE option.

    Medium volume

    Medium volume setting code

    Set the scanner buzzer.

    Choose ONE option.

    High volume

    High volume setting code

    Set the scanner buzzer.

    Choose ONE option.

    Buzzer off

    Buzzer off setting code

    Set the scanner buzzer.

    Choose ONE option.

    Open / save sound settings image ↗
    ← Back to Support
Cookie Use
We use cookies to ensure a smooth browsing experience. By continuing we assume you accept the use of cookies.
Learn More